Fly Screen Bottom Track

The lower half of a fixed track installation. Screwed to the bottom of the window opening, it works with the top track to hold your fly screen securely in position once slotted in.
Each track comes with 3 screws included. You'll need a drill and screwdriver or impact driver to install.


How to measure: If ordering alongside a new fly screen, match the track width to your screen width. If buying separately, measure the clear width of the window opening at the bottom (side to side) and subtract 2mm for clearance. Tracks are cut to your entered measurement. Buying all new fly screens and tracks? Head to our DIY info page and follow how to measure track fit to take the necessary measurements off (3mm), the height and width.

Installation overview: Same process as the top track — drill 3 pilot holes in the track, mark the position on the window sill, drill into the sill, and screw in from the middle outward. With both tracks secured, slide your screen into the top track first, then lower it into the bottom track.

Available in: White (Pearl White), Black (Custom Black), Anodic Natural, Matte Anotec, Dark Grey Anotec, Silver Grey Apo, Grey Bronze Anodized, Charcoal Anotec, Silver Grey, Deep Ocean, Dune, Hammersley Brown, Jasper, Monument, Palladium Silver, Pearl Paperbark, Primrose, Shale Grey, Stone Beige, Surf Mist, Ultra Silver, White Birch, Woodland Grey, and Mill Finish.